Lighting systems for substations and plants (LV and MV)

“I am sure nobody would want to grope around energized equipment, rotating shafts, variable drives, and power tools in the dark or dim light. Illumination is vital for all industries. The risk is injury and death. For this reason, it is important to install proper lighting system in all sections.

Experts suggest that 75% of the lighting should be primary while the remaining for emergency lighting systems accounts for 25%. The following highlights the standards, emergencies lighting, monitoring, and control as well as recommended locations.”

Standard Lighting

Industries use the following lamps. Lamps, in this case, means equipment that produces light

• Incandescent lighting produces light when the included filament is energized. Used for general lighting, offices and living quarters

• Reflector lamps: similar to incandescent lights but with an included reflector. Applications include emergency lighting and general lighting

• Gas discharge lamps produce light through the excitation of a contained gas. Common types include fluorescent, metal halide and sodium vapor lamps and are used for general industry illumination, and pathway lighting. 

The metal halide lamps feature high color rendering suitable for assembly lines and inspection areas while sodium vapor lamps feature low rendering, thus are suited for lighting pathways and yards.

Most plants have an included step-down transformer to provide the right voltage for the lighting system from the grid. The separate transformer for lighting prevents frequent blackouts due to the voltage fluctuations associated with the primary transformer feeding the LV and MV equipment. The three-phase supply should have 4-pole switches or circuit breakers. This ensures that the neutral is always open when the panel is de-energized during maintenance.
From the panel, each sub-circuit should be a single-phase consumer circuit, with one wire from the single phase, and the aforementioned neutral from the panel. Alternately, install a single-phase two-winding transformer to ensure that the voltage matches for all the light fittings.

Other than the general illumination, the following are key lighting installations:
• Main white lights: installed to mark out the substation or industry and usually have a range of 15 miles in every direction of approach
• Subsidiary lights: installed to mark any vertical extremities and irregular building projections
• Secondary lights are placed next to the main white lights in case the latter fail
• Emergency lighting

Emergency Lighting
Emergencies in substations and plants are always significantly risky considering the equipment and voltages in the installation. Prompt evacuation from the premises is important. The event may result in primary power loss, so emergency lighting is crucial in such situations. The evacuation should not be a risk by itself due to poor lighting.
Provide readily available portable lamps and torches near exit doors, operational rooms, main plant areas, accommodation quarters, control room and OIM offices. The lamps should already be fully charged in case of emergency, with conveniently placed and functional charging units.

Additional Tips
• Install fluorescent lamps to illuminate rotating shafts to avoid the stroboscopic effect associated with other lights. This effect makes the shaft appear stationary when in reality rotating at high speeds, thus increasing chances of injury or death.
• Subdivide lighting schemes within distinct modules: this increases chances of having illumination when the system fails. 
• During the lighting system design stage, ensure the farthest lamp receives a minimum of 95% of its nominal voltage. This entails proper cable sizing, and assumptions that all the fitting are energized during the design stage. 
• Install light is fitting control in non-hazardous areas for easy accessibility.
• Use the lighting fittings that fit the designated area. For example, exterior illumination and areas where water sprays are used, such as modules that require water-based firefighting systems use all-weather lights and waterproof electrical fittings. Other non-hazardous lighting systems are okay for areas such as control rooms, computer rooms, accommodation areas and offices

• Maximize on the use of natural lights through using transparent roofing and openings
• Replace standard lamps with the more energy efficient variants in the market
• Layout modification for optimum illumination
• Interior color selection aids in illumination and energy savings

Navigation and Control
The best option for a substation is to install an automatic system to switch on the lights a quarter of an hour before sunset, and to sunrise and in times of reduced visibility, as well as a manual override system for unusual conditions, or during maintenance times. The accompanying user interface in the control rooms should indicate the real-time state of every light and fitting.
Addition systems in case automatic switchover to a secondary system in case the white lights control system fails, with a corresponding indication in the control room.

SOLAR – HELP REDUCING YOUR ELECTRICITY BILL- SMART HOMES

Solar Power Technology is mature enough to bring great benefits in many regions of the world. I’m sure by now we all know these benefits, smaller electricity bill, endless energy supply, green technology.

As a company with proving tracking record in solar panel procurement and installation, our client might want to ask one or two question about it. We are here to give you a very good answers….
Things to consider when buying, designing and installed solar panel to generate electricity
In residential areas a solar power system will most likely connected to the main power grid. Because of this a first step will be to find out what regulations are in place in that particular region with regards to this type of installation. If it is an area you don’t know a good place to get advice is local retail shops that sell solar power equipment.

The second step is to determine how big this system needs to be. This is a more complex task and requires that you know exactly what type of operation is required. There are systems that can function entirely off grid, systems that are connected to the grid; you will need to determine if a battery bank is necessary or desired. Mostly in Nigeria, off grid is the retail side that we are likely to consider.



Residential Solar Power 1
When the solar power installation is connected to the grid energy savings are possible because now the property owner will be able to sell the electricity he produces to the grid electrical company. In this case you will have to install an additional meter that measures the energy delivered to the grid. The more panels you have the more energy you will produce and more money can be saved from the electricity bill.
In off the grid installation the solar power system must be able to handle the desire load in any condition. In this case a battery bank that can store energy is very helpful during night time.

Determining the size of the system
Once you know the average annual power consumption you can apply certain formula to determine the required power capacity of the system. This calculation can be quite complex because there are many factors to consider like how much sunlight is in that area, number of hours with sunlight per day, and panel inclination.

No matter the type of installation some components are mandatory like the solar panels, the elements that convert the sunlight to electrical energy, the inverter that converts DC current to AC current, electrical panel to hold the fuses and switches that provide protection of the installation.
It is also good practice to install a meter to monitor energy produced. If a battery bank is necessary you will need a battery charger and the batteries themselves. In some cases you might need a transfer switch to route power distribution from grid to solar system and vice-versa.
Solar Power System has benefited by an increased interest year after year and will become even more popular as technology will rise their efficiency and allow it to work well in areas with less sunlight.
Homes with solar panel the provide alternative electricity supply are today called SMART HOMES